Adaptor Plates

Please find below our standard Adaptor Plate part numbers and costs. As with our headstocks, we offer both manual and hydraulic options. Please click on the link at the bottom of the page for more information.

To find out where your nearest Cherry Products Dealership is click here.

Manual Locking

Adaptor Plate With Manual Locking Pin/s
CA01A - £1400 RRP	CA01B - £1600 RRP	CA01C - £1900 RRP
To Pick Up:	To Pick Up:	To Pick Up:
Manitou	Pin And Cone	JCB Q Fit With Tine Facility
JCB Toolcarrier	JCB Q Fit With No Tine Facility	Merlo ZM3 (Single Pin)
JCB Compact Toolcarrier (Quick Hitch)	Merlo ZM2
Euro 8	Volvo (JCB Industrial/Europe)
Kramer (standard) 40mm Ø Pin	Scorpion (Large Kramer) 50mm Ø Pin
New Holland	Chilton/Mailleux MX
MF/Bobcat (Telehandler)	CAT
Weidemann/Hoftrac	Sanderson
Trima SMS 5
Quickie No.3 (ALO)
For a replacement Manual Locking Bar use part number MLB- then the name of the headstock you are adapting to. For example: MLB-Pin and Cone. RRP £70

*All prices shown for manual Adaptor Plates are based on a single pin to slide through the brackets and Adaptor Plate to lock on an attachment. If you would like an over centre handle please call the sales office for a quote.*

IMPORTANT INFORMATION

When ordering please state the configuration after the part number with the machine bracket type coming first and the bracket type that the Adaptor Plate needs to pick up second. For example: CA01B-Euro (machine bracket type) to pick up Pin and Cone (the required bracket to pick up).

Adaptor Plates will derate the capacity of the machine and and in some configurations can foul the machine's tyres. For information on this please contact our Sales Office. Adaptor Plates are a comprimise and as such may not work as well as an original or complete replacement unit in relation to achievable crowd and dump angles. Whilst we make every effort to compensate this, this does need to be recognised.

Hydraulic Locking

Adaptor Plate With Hydraulic Locking Pin/s
CA02A - £1750 RRP	CA02B - £1950 RRP	CA02C - £2245 RRP
To Pick Up:	To Pick Up:	To Pick Up:
Manitou	Pin And Cone	JCB Q Fit With Tine Facility
JCB Toolcarrier	JCB Q Fit With No Tine Facility	Merlo ZM3 (Single Cylinder)
JCB Compact Toolcarrier (Quick Hitch)	Merlo ZM2
Euro 8	Volvo (JCB Industrial/Europe)
Kramer (standard) 40mm Ø Pin	Scorpion (Large Kramer) 50mm Ø Pin
New Holland	Chilton/Mailleux MX
MF/Bobcat (Telehandler)	CAT
Weidemann/Hoftrac	Sanderson
Trima SMS 5
Quickie No.3 (ALO)

Click on the Headstock type to see the Cylinder and Seal Kit used.

IMPORTANT INFORMATION

When ordering please state the configuration after the part number with the machine bracket type coming first and the bracket type that the Adaptor Plate needs to pick up second. For example: CA02B-Euro (machine bracket type) to pick up Pin and Cone (the required bracket to pick up).

Adaptor Plates will derate the capacity of the machine and and in some configurations can foul the machine's tyres. For information on this please contact our Sales Office. Adaptor Plates are a comprimise and as such may not work as well as an original or complete replacement unit in relation to achievable crowd and dump angles. Whilst we make every effort to compensate this, this does need to be recognised.