Contact Cherry Products

  01608 678 197   Attachment Enquiries  Trailer Enquiries

Root Crop Buckets

Root Crop Bucket

The Cherry Root Crop Bucket has 25mm round bars in the front and on the back. The standard spacing of these bars is 100mm centre to centre which gives 75mm gaps. Bar spacing can be adjusted to suit individual requirements. To reduce damage to the crop, a round bar is also welded to the edge of the bucket, but we can supply without this, or with a level front edge, depending on your requirements. Special builds are also welcomed, such as the above images where a higher capacity was needed.. 

To find out where your nearest Cherry Products Dealership is click here.

Brackets Included

Part No.CapacityWidthHeightDepthWeight KgRRP 
CB17S 0.73m³ (26ft³) 1.98m (6'6") 0.75m (2'5") 0.77m (2'6") 374 £3000
CB18S 1.21m³ (43ft³) 1.98m (6'6") 0.84m (2'9") 1.00m (3'3") 390 £3260
CB17A 0.79m³ (28ft³) 2.13m (7') 0.75m (2'5") 0.77m (2'6") 398 £3140
CB18A 1.30m³ (46ft³) 2.13m (7') 0.84m (2'9") 1.00m (3'3") 423 £3395
CB19A 1.84m³ (65ft³) 2.13m (7') 0.96m (3'2") 1.36m (4'6") 442 £3615
CB17 0.84m³ (30ft³) 2.28m (7'6") 0.75m (2'5") 0.77m (2'6") 406 £3220
CB18 1.41m³ (50ft³) 2.28m (7'6") 0.84m (2'9") 1.00m (3'3") 440 £3490
CB19 1.98m³ (70ft³) 2.28m (7'6") 0.96m (3'2") 1.36m (4'6") 465 £3700
CB17W 0.89m³ (32ft³) 2.45m (8') 0.75m (2'5") 0.77m (2'6") 430 £3245
CB18W 1.50m³ (53ft³) 2.45m (8') 0.84m (2'9") 1.00m (3'3") 468 £3590
CB19W 2.10m³ (74ft³) 2.45m (8') 0.96m (3'2") 1.36m (4'6") 490 £3820

If you require a bolt on reversible toe plate on your bucket please add TP27 to the bucket part number and add the RRP from the table below that relates to the width of bucket you have chosen*


 Root Crop Harvesting Bucket NEW!

Part No.CapacityWidth  Height Depth Weight KgRRP 
CB20W 2.8m³ 3m (9'8") 0.83m (2'7") 1.78m (5'8") 750 £4730



Replacement Toe Plates

We keep a massive selection of Bolt on and Weld on Toe Plates in stock, which can usually be despatched on the same day of order. The below lists recognise our standard, stock toe plates. If you require a special toe plate that is not listed below, please contact us and we will endeavor to meet your needs. For bolt on toe plates, if you are unsure which blade is right for you, call us with the hole centres and the number of holes required and we will do our best to help you out. The TP27 range is Bolt on toe plates and the TP26 is weld on.

TP26SS/1500 1.50m (4'11") 150 X 20mm £275
TP26S/1980 1.98m (6'6") 150 x 20mm £290
TP26A/2133 2.13m (7') 150 x 20mm £300
TP26/2286 2.28m (7'6") 150 x 20mm £300
TP26AW/2450 2.45m (8'½") 150 x 20mm £305
TP26WW/2591 2.59m (8'6") 150 x 20mm £305
TP26WWW/2743 2.74m (9') 150 x 20mm £315

TP27SS/1500 1.50m (4'11") 5 285mm 200 x  20mm £370
TP27S/1980 1.98m (6'6") 7 285mm 200 x 20mm £385
TP27A/2133 2.13m (7') 8 285mm 200 x 20mm £395
TP27/2286 2.28m (7'6") 8 285mm 200 x 20mm £415
TP27AW/2450 2.45m (8'½") 8 320mm 200 x 20mm £435
TP27WW/2591 2.59m (8'6") 8 320mm 200 x 20mm £455
TP27WWW/2743 2.74m (9') 9 320mm 200 x 20mm  £480
For Spare Toe Plate Nut and Bolt use Part Number PB01 RRP £8 each


Edge Options

As standard, all of our Root Crop Buckets come with a weld on front edge with a round bar front for crop protection. For another type of front edge, please add one of the below part numbers.

Part Number
Bolt on reversible toe plate (not recommended)
£Price dependant on the width of the bucket.  Please see the replacement toe plate section for the full range.
No front edge, bars welded directly to front round bar
£No Extra Cost


Agricultural Attachments - Specialist UK Manufacturer

Get In Touch