Contact Cherry Products

  01608 678 197   Attachment Enquiries  Trailer Enquiries

Grain Buckets

Designed to crowd back level and offer the very best dump angle available, our Grain Buckets are purpose built to suit your machine.

Support straps 12mm thick run continuously around the bucket, with further cross section supports underneath and on the back of the bucket.  Our unique side profile design (including 12mm thick side stiffeners) allows the floor length not to be too long, thus maximising tear out force, whilst still allowing the bucket to crowd back level. 

The Cherry Grain bucket range is manufactured to the highest quality from 5mm, 6mm, 8mm or 10mm plate (depending on model). This is re-enforced by the support straps and gusseting around the bucket. For high capacity grain buckets, please refer to our X-form range.

To find out where your nearest Cherry Products Dealership is click here

Brackets Included

Part No.CapacityWidthHeightDepthWeight KgRRP 
CB04A 1.30m³ (46ft³) 2.13m (7') 0.84m (2'9") 1.16m (3'10") 400 £2,040
CB05A 1.58m³ (56ft³) 2.13m (7') 0.90m (3') 1.21m (4') 420 £2,225
CB06A 1.84m³ (65ft³) 2.13m (7') 0.96m (3'2") 1.32m (4'4") 470 £2,460
CB04 1.41m³ (50ft³) 2.28m (7'6") 0.84m (2'9") 1.16m (3'10") 415 £2,115
CB05 1.69m³ (60ft³) 2.28m (7'6") 0.90m (3') 1.21m (4') 460 £2,275
CB06 1.98m³ (70ft³) 2.28m (7'6") 0.96m (3'2") 1.32m (4'4") 490 £2,510
CB07 2.26m³ (80ft³) 2.28m (7'6") 1.08m (3'6") 1.35m (4'5") 600 £2,900
CB04W 1.50m³ (53ft³) 2.45m (8') 0.84m (2'9") 1.16m (3'10") 443 £2,190
CB05W 1.80m³ (64ft³) 2.45m (8') 0.90m (3') 1.21m (4') 490 £2,330
CB06W 2.11m³ (74ft³) 2.45m (8') 0.96m (3'2") 1.32m (4'4") 520 £2,560
CB07W 2.41m³ (85ft³) 2.45m (8') 1.08m (3'6") 1.35m (4'5") 590 £3,005
CB08W 2.60m³ (90ft³) 2.45m (8') 1.12m (3'8") 1.36m (4'5") 610 £3,145
CB30W 2.80m³ (98ft³) 2.45m (8') 1.12m (3'8") 1.50m (4'11) 620 £3,250
CB31W 3.00m³ (106ft³) 2.45m (8') 1.23m (4') 1.52m (5') 850 £3,590
CB32W 3.25m³ (115ft³) 2.45m (8') 1.30m (4'3") 1.54m (5'1") 880 £3,950
CB33W 3.50m³ (124ft³) 2.45m (8') 1.32m (4'4") 1.56m (5'1") 920 £4,140
CB34W 3.75m³ (132ft³) 2.45m (8') 1.36m (4'6") 1.66m (5'5") 1000 £4,620
CB35W 4.00m³ (141ft³) 2.45m (8') 1.40m (4'7") 1.77m (5'10") 1075 £4,920

*If you require a bolt on reversible toe plate on your bucket please add TP27 to the bucket part number and add the RRP from the table below that relates to the width of bucket you have chosen*


Replacement Toe Plates

We keep a massive selection of Bolt on and Weld on Toe Plates in stock, which can usually be despatched on the same day of order. The below lists recognise our standard, stock toe plates. If you require a special toe plate that is not listed below, please contact us and we will endeavor to meet your needs. For bolt on toe plates, if you are unsure which blade is right for you, call us with the hole centres and the number of holes required and we will do our best to help you out. The TP27 range is Bolt on toe plates and the TP26 is weld on.

TP26SS/1500 1.50m (4'11") 150 X 20mm £255
TP26S/1980 1.98m (6'6") 150 x 20mm £270
TP26A/2133 2.13m (7') 150 x 20mm £275
TP26/2286 2.28m (7'6") 150 x 20mm £280
TP26AW/2450 2.45m (8'½") 150 x 20mm £285
TP26WW/2591 2.59m (8'6") 150 x 20mm £285
TP26WWW/2743 2.74m (9') 150 x 20mm £295

TP27SS/1500 1.50m (4'11") 5 285mm 200 x  20mm £345
TP27S/1980 1.98m (6'6") 7 285mm 200 x 20mm £360
TP27A/2133 2.13m (7') 8 285mm 200 x 20mm £370
TP27/2286 2.28m (7'6") 8 285mm 200 x 20mm £385
TP27AW/2450 2.45m (8'½") 8 320mm 200 x 20mm £405
TP27WW/2591 2.59m (8'6") 8 320mm 200 x 20mm £425
TP27WWW/2743 2.74m (9') 9 320mm 200 x 20mm  £445
For Spare Toe Plate Nut and Bolt use Part Number PB01 RRP £6 each



Part Number
Bolt on reversible toe plate
£Price dependant on the width of the bucket.  Please see the replacement toe plate section for the full range.
Full width spill guard
Half width spill guard
Internal corner gussets
Internal full length gussets


  • Integral Spill Guard, every bucket is designed with an internal spill guard, reducing the chance of grain spilling whilst in transit.  
  • Bucket Angle, designed to maximise the crowd and dump potential of your machine by having a specific angle to suit your headstock.
  • Support Straps, are set at the width of your mounting brackets for continuous strength and load spreading around the bucket.
  • Toe Plate, 20mm thick as standard on all models.
  • Corner Gussets, larger models have corner gussets as standard.
  • Stepped Side Profile, unique design on larger models allows floor length to be as short as possible whilst still allowing a level bucket fill. Aids in maximising tear out force of the machine.



Agricultural Attachments - Specialist UK Manufacturer

Get In Touch