Prices shown for Tines only
We offer a massive selection of pallet fork tines for most machines. These will either fit our pallet fork carriages, or your exisitng headstock. We can geet tines rated to your specific needs, or have them specially made if your require something slightly different. As with all pallet fork attachments, the load must never exceed the SWL of the tines, the pallet fork carriage or the lift capacity of the machine.
For more Information, download our sales sheet at the bottom of the page.
|
|
CLASS
|
SECTION
|
LENGTH
|
RRP £
|
|
|
CLASS ITA IIA
|
100 x 40mm
|
1100mm
|
£ 380.00
|
|
|
CLASS ITA IIB
|
80 x 40mm
|
1100mm
|
£ 490.00
|
|
|
CLASS ITA IIB
|
100 x 40mm
|
1100mm
|
£ 500.00
|
|
|
CLASS ITA IIIB
|
100 x 50mm
|
1100mm
|
£ 710.00
|
|
|
CLASS ITA IIIB
|
125 x 50 mm
|
1100mm
|
£ 800.00
|
|
|
CLASS ITA IIIB
|
150 x 50 mm
|
1100mm
|
£ 850.00
|
|
|
JCB ROUND BAR
|
100 x 45mm
|
1100mm
|
£ 650.00
|
|
|
CAT ROUND BAR
|
100 x 45mm
|
1100mm
|
£ 550.00
|
TINE INFORMATION
- ITA Tines fit onto Headstocks or Pallet Fork Carriages with a castleated top and bottom rail
fitted
- ITA3 Tines have a 20'' space between the top and bottom rail fittings. They would fit our CP40 Pallet Fork Carriage
- ITA2 Tines have a 16'' space between the top and bottom rail fittings. They would fit our CP39 Pallet Fork Carriage
- If the ITA tine has 'A' after it, the tine is level with the bottom rail
(see main image)
- If the ITA tine has 'B' after it, there is a 6-8'' drop from the bottom rail to the tine
- JCB Round Bar forks either fit onto a 50mm or 60mm round bar which 'floats' in the JCB Headstock or Pallet Fork Carriage.
They would fit into our CP41 Pallet Fork Carriage
| 
