cherry products header

HD Fork & Grabs - for 3 tonne machines

Brackets Included / 1760mm Vertical Opening Height

The Cherry CF07 range of fork and grabs are designed for machines with a capacity of 3-4.5 tonnes. With hydraulic cylinders taken from the tough 4 in 1 bucket, and 38mm cylinder and pivot pins, the CF07 range is British built to a quality you can trust. The range starts at 7' wide and can be built upto 8' as standard, but one off builds are always available. We also offer a wide range of tine combinations to suit your needs, such as KV style, Hardox or 50mm round for fork tines and Hardox or KV style for grab tines. All of the Forks in our heavy duty grab range include grab stops for the protection of the hydraulic cylinders and pins.

To find out where your nearest Cherry Products Dealership is click here

 
Part No.
Width
Height
Depth
m3
CuFt
Kilos
Tines
No.
 
CF07HDW
2450 (8')
1300
1190
2.13 
75 
700
Hardox
10
 
CF07W
2450 (8')
1300
1190
2.13 
75
605
2'' round
11
 
CF07KW
2450 (8')
1300
1190
2.13 
75 
595
KV type
11
 
CF07HD
2286 (7'6")
1300
1190
1.98
70 
605
Hardox
9
 
CF07
2286 (7'6")
1300
1190
1.98
70
485 
2'' round
10
 
CF07K
2286 (7'6")
1300
1190
1.98
70 
475 
KV type
10
 
CF07AHD
2133 (7')
1300
1190
1.85 
65
500 
Hardox
8
 
CF07A
2133 (7')
1300
1190
1.85
65 
460 
2'' round
9
 
CF07AK
2133 (7')
1300
1190
1.85
65 
450
KV type
9

KEY- 'K' = KV style tines. 'HD' = Hardox style tines.

All of the forks in our range come with a tube style back for maximum strength and visibility. For another type of fork back to suit your application, please add one of the below part numbers to your enquiry with your Dealer. 

 
Part Number
Description
 
CM1
Middle section plated to protect machine's headstock
 
CM4
Whole fork back plated with 'Cherry' cut outs
 
CM2
Whole fork back plated

Fork and Grab

Fork and GrabFork and Grab

 

 

 

 

 

 

 

 

 

Fork and GrabFork and Grab

 

 

 

 

 

 

 

 

 


Fork and GrabFork and Grab

  • Tine Options, to suit your application, we offer a choice of KV Style, Hardox or 2’’ round base tines and KV Style or Hardox Grab tines. All KV Style tines are bushed in the frame. 
  • Pins, 38mm DIA high grade with retaining bolt. Used throughout all of our HD Fork & Grab ranges and HD Waste Buckets
  • Fork Back, As standard built with ‘tube style’ for maximum strength and visibility. However, we can build with the middle plated or the whole fork back plated 
  • Grab Stops, are fitted for the opening and closing of the grab to protect the hydraulic cylinders 
  • Rams, inward facing tees with plate protection. Ultra high capacity. 
  • Wide Opening Grab, 1760mm vertical height
  • Wear Pads, across base of fork for protection of tine holder

Fork and Grab

 
Part Number
Description
RRP £
 
CF07P01
38mm DIA Pivot Pin 195mm Long
£ Check
 
CF07P02
38mm DIA Top Ram Pin 145mm Long
£ Check
 
CF07P03
38mm DIA Bottom Ram Pin 195mm Long
£ Check
 
CT06
810mm Curved KV Type Grab Tine w/ M24 Nut 
£ Check
 
CT06/HD
810mm Curved Profile Tine
£ Check
 
CT03/2
1100mm KV Type Base Tine w/ M28 Nut
£ Check
 
CT02HD/01
1200mm Hardox Tine 
£ Check
 
CT01
1100mm 50mm DIA Tine w/ M28 Nut
£ Check
 
CP02
Hydraulic Cylinder
£ Check

Fork and Grab